Western Australian hard-rock lithium operations produce spodumene concentrate, typically around 6% Li₂O, while battery manufacturers require refined lithium hydroxide or lithium carbonate. In the conventional sulphate route, natural spodumene, which is too stable to be attacked by acid, is first calcined to change its crystal structure. It is then roasted with sulphuric acid, converting the lithium to soluble lithium sulphate, and after purification of the solution, sodium hydroxide converts the lithium sulphate to lithium hydroxide, which is crystallised and dried.
This article follows the conventional sulphate route and gives the conversion ratios used in planning and reporting. Upstream concentration is covered in spodumene DMS, spodumene flotation and heavy liquid separation.
Process steps
Calcination converts dense alpha spodumene to beta spodumene, which has a more open structure and reacts with acid; published work gives a temperature range of about 850 to 1,100 °C, depending on the material and the kiln. The beta spodumene is then mixed with concentrated sulphuric acid and roasted at about 250 °C, where lithium is exchanged for hydrogen to form lithium sulphate.
In the water leach, the lithium sulphate dissolves and the residue, mostly aluminosilicate, is filtered and washed. Impurities are then removed: pH adjustment and precipitation remove iron, aluminium and other metals, and calcium and magnesium are removed with reagents and often by ion exchange.
In the conversion step, sodium hydroxide reacts with lithium sulphate to form lithium hydroxide and sodium sulphate, and the sodium sulphate is crystallised out as a by-product. Finally, lithium hydroxide monohydrate is crystallised, washed, dried and packed to battery-grade specifications.
Conversion ratios
where
- lithium expressed as lithium oxide, the usual basis for spodumene grades (t)
- lithium carbonate equivalent: the Li₂CO₃ the same lithium would make (t)
- , ,
- ratios of molar masses: 2 × 41.96 ÷ 29.88, 73.89 ÷ 29.88 and 73.89 ÷ (2 × 41.96)
Worked example: a refinery treats 100,000 t/y of 6.0% Li₂O concentrate, containing 6,000 t of Li₂O. At an assumed overall lithium recovery of 85%, it recovers 5,100 t of Li₂O, which becomes 5,100 × 2.809 = 14,300 t of LiOH·H₂O, or 12,600 t LCE. The stoichiometric acid requirement for all 6,000 t of Li₂O fed to the roast is 6,000 × 3.28 = 19,700 t, and in practice an excess is added. Converting 5,100 t of Li₂O requires at least 13,700 t of NaOH and produces about 24,200 t of sodium sulphate.
These factors are suitable for planning and reporting, but recoveries and reagent consumptions should be taken from testwork and plant data, since impurity removal, washing losses and reagent excesses all affect the actual figures.
Reporting bases for lithium
Lithium is reported on several bases: Li₂O for concentrates, LCE for comparing products, and tonnes of product (LiOH·H₂O or Li₂CO₃) for sales, and the basis should always be stated. Pure spodumene contains 8.03% Li₂O, so a 6% concentrate is about three-quarters spodumene, and each tonne of 6% concentrate contains lithium equivalent to 0.148 t of lithium carbonate.
Glossary
- Spodumene
- LiAlSi₂O₆, the main lithium mineral in hard-rock deposits; 8.03% Li₂O when pure.
- Alpha and beta spodumene
- The natural, dense form and the heat-converted, more reactive form.
- Calcination
- Heating a solid to change its structure or drive off components.
- Acid roast
- Baking beta spodumene with concentrated sulphuric acid to form lithium sulphate.
- Causticisation
- Reacting a salt with sodium hydroxide; here, converting lithium sulphate to lithium hydroxide.
- LiOH·H₂O
- Lithium hydroxide monohydrate, the usual hydroxide product.
- LCE
- Lithium carbonate equivalent: the Li₂CO₃ the same lithium would make.
- Battery grade
- A product specification with tight limits on impurities for battery cathode manufacture.
Frequently asked questions
How much lithium hydroxide does a tonne of spodumene concentrate produce?
A tonne of 6% Li₂O concentrate contains 0.060 t of Li₂O, which could produce 0.169 t of LiOH·H₂O at 100% recovery. Multiply by the overall recovery for the actual figure.
How is LiOH·H₂O converted to LCE?
Multiply by 0.880. One tonne of lithium hydroxide monohydrate contains the same lithium as 0.880 t of lithium carbonate.
Why is spodumene calcined before leaching?
Natural alpha spodumene resists acid attack. Heating converts it to beta spodumene, whose more open structure reacts with sulphuric acid.
What is the by-product of the sulphate route?
Sodium sulphate, formed when sodium hydroxide converts lithium sulphate to lithium hydroxide: about 4.75 t per tonne of Li₂O converted, by stoichiometry.
Discuss your plant with a metallurgist
Tiegel is a Perth metallurgy company. We help with testwork, plant optimisation, metal accounting and investigations, and we build the Tiegel Suite software.
Talk to a metallurgistReferences and further reading
- Paris, J. et al. Preliminary investigation into lithium extraction by phosphoric acid leaching of spodumene (reviews the conventional calcination and acid roast route). Link
- Salakjani, N.K., Singh, P. and Nikoloski, A.N. (2016). Mineralogical transformations of spodumene concentrate from Greenbushes, Western Australia. Part 1: Conventional heating. Minerals Engineering, 98, 71–79.
Worked examples and charts marked illustrative use invented figures, not data from any operation.