Tiegel home Talk to a metallurgist

Mill charge filling from a measurement

During a shutdown, measure the vertical distance from the top of the liners to the surface of the charge at the centre of the mill. This calculator turns that into the percentage of the mill volume the charge occupies.

Results

The example values are filled in so you can see how it works. Results update as you type.

The formula

h=D−H,R=D2J=R2cos−1(R−hR)−(R−h)2Rh−h2πR2

where

D
mill diameter inside the liners (m)
H
vertical distance from the top of the liners to the charge surface, measured at the mill centre (m)
h
depth of the charge bed (m)
J
fraction of the mill cross-section, and so of its volume, occupied by the charge

Want the background? Read Rapid work index estimates from plant samples: separating ore hardness from grinding circuit performance.

Discuss your plant with a metallurgist

Tiegel is a Perth metallurgy company. We help with testwork, plant optimisation, metal accounting and investigations.

Talk to a metallurgist

These calculators use standard published formulas and are provided as a guide. Check results before relying on them for design or reporting.