Tiegel home Talk to a metallurgist

Stockpile live capacity calculator (conical pile)

Enter the pile height, the ore's angle of repose and draw-down angle, its bulk density and the mill feed rate. The calculator gives the total and live (gravity-reclaimable) tonnes for a cone over one central feeder.

Results

The example values are filled in so you can see how it works. Results update as you type.

The formula

Vtotal=πh33tan2αflive=(tanαtanα+tanβ)2

where

Vtotal
volume of a conical stockpile (m³); multiply by bulk density for tonnes
h
stockpile height (m)
α
angle of repose of the ore (degrees from horizontal)
β
draw-down angle: the slope of the crater that forms above a single feeder, usually steeper than α
flive
live fraction: the share of the pile that flows out by gravity through one central feeder

Want the background? Read Crushing circuit design: crushing rate, reduction ratio, closed-circuit screening and stockpile sizing.

Discuss your plant with a metallurgist

Tiegel is a Perth metallurgy company. We help with testwork, plant optimisation, metal accounting and investigations.

Talk to a metallurgist

These calculators use standard published formulas and are provided as a guide. Check results before relying on them for design or reporting.